Propellerads

FIX DEADBOOT / NO RECOVERY / NO FASTBOOT / FORMATTED WHILE IN QPST MODE


REQUIREMENTS:
  • Dead-Boot FLARE(S100) but still detected in device manager (Unknown Device or in COM PORTS).
  • USB Cable.
  • Jellybean/ICS Driver
  • Laptop / PC Running Windows. I’ve tested this using windows XP SP3 and Windows 7 32bit SP1.
  • Qualcomm Product Support Tools. I’ve tested this using version 2.7 build 399.
  • Jellybean BP Firmware.
  • Jellybean Image Dump
  • Best of all Common Sense.
DOWNLOAD LINKS:
PROCEDURE:
  • Extract QPST-2.7.399.rar and run SETUP.EXE
  • Run SETUP.EXE. press install when it prompt to install additional Visual C++ runtime libraries. Follow the defaults, press NEXT until it finish the installation.
  • Connect Deadboot Flare(s100) to Computer / Laptop.
  • Go to device manager, expand PORTS (COM & LPT). Check if there is an item called Qualcomm HSUSB QDLOADER 9008. if the item is there, you are done with the driver install.
  • If there is no item under PORTS(COM &LPT), check device manager under “Other Device>Unknown Device”.
  • Double Click “Unknown Device > Update Driver > Browse My Computer” Browse to the where you saved extracted Jellybean / ICS Drivers. It will install the driver, if it prompts for unsigned drivers, press “Install Anyway”.
  • It should be now listed under COM PORTS > Qualcomm HSUSB QDLOADER 9008.
RUN QPST AND RE-PROGRAM EMMC:
note: If you are using Windows 7, make sure you run it under compatibility mode in Windows XP SP3, and run as Administrator.
  • Run EMMC Software Download.
  • Press Browse, it will detect your phone. Look for the PHONE TAB that says DOWNLOAD and press OK.
  • Put check mark on “Program bootloaders, Program MMC Device, Trusted”.
  • Under “Flash Programmer File name” , select “MPRG8X25.hex.
  • Under “Boot Image”, enter 8X25_msimage.mbn.
  • Press Load XML Def, navigate to your extracted JB Firmware, select rawprogram0, press OPEN.
  • Press Load Patch Def, navigate to your extracted JB Firmware, select patch0, then press OPEN.
  • Press DOWNLOAD
  • A warning message may appear, “Timeout Waiting” etc. or “Cookie not Received, if the error is “Timeout Waiting” Press OK and then press “Switch Device to Load, check your phone (S100), it will show “Reset for entry QPST”.
  • Exit EMMC Software Download. Proceed to Flash Jellybean BP Firmware and then Flash Jellybean IMG Dump.
“If error is COOKIE NOT RECEIVED, Sorry it is still bricked”.
“This tutorial will also fix CWM formatted boot partition”
Creditsryanrudolf tcp / tpc / symb / xda / modaco From : CHERRY MOBILE FLARE PH (OFFICIAL) Facebook Group



Get paid to share your links!
Share this article :
 
Support : Creating Website | Johny Template | Mas Template
Copyright © 2011. LINGGAR21 - All Rights Reserved
Template Created by Creating Website Published by Mas Template
Proudly powered by Blogger